|
Code Rate |
Recording File Size/Day/Channel |
|
1000kbps |
10G |
|
2000kbps |
20G |
|
3000kbps |
30G |
|
4000kbps |
40G |
|
5000kbps |
50G |
|
HDD total capacity |
Chanel Number |
Resolution Ratio |
Video Days |
|
8T |
8 |
960P×8 |
80 days |
|
8T |
8 |
1080P×8 |
50 days |
|
8T |
16 |
960P×16 |
40 days |
|
8T |
16 |
1080P×16 |
25 days |
|
8T×2 |
25 |
960P×25 |
50 days |
|
8T×2 |
25 |
1080P×25 |
32 days |
|
8T×2 |
36 |
960P×36 |
35 days |
|
8T×2 |
36 |
1080P×36 |
22 days |
Remarks: the above data is calculated by H.264 & low rate bite, when onvif IPC access NVR, the video days will reduce half.
|
HDD total capacity |
Chanel Number |
Resolution Ratio |
Video Days |
|
8T |
8 |
2MP× 8 |
125 days |
|
8T |
8 |
5MP×8 |
83 days |
|
8T |
16 |
2MP×16 |
62 days |
|
8T |
16 |
5MP×16 |
41 days |
|
8T×2 |
25 |
2MP×25 |
80 days |
|
8T×2 |
25 |
5MP×25 |
53 days |
|
8T×2 |
36 |
2MP×36 |
55 days |
|
8T×2 |
36 |
5MP×36 |
37 days |
Remarks: the above data is calculated by H.265+ & low rate bite, with single channel 2MP 4GB~8GB/Day, 5MP 6GB~12GB/Day
user name : admin, password: 123456
2. Why I can see nothing when I start the system?
Step 1:Check NVR if it has electricity, user can check mouse lamp,ethernet port and so on, we suggest use NVR standard power
Step 2: Check display resolution, our NVR default resolution: 1920×1080. When the maxium resolution of display is less than NVR, there is no interface output. You can keep pressing Right mouse button for more than 10 seconds and NVR output resolution will be set to 1024×768.
Step3:Check interface if there is output after deleting all outside device and power on by itself, our NVR support VGA output and HDMI signal
3. After starting interface, it prompts ‘NO HDD’
Step 1:Confirm NVR to connect regular hard disk without fault
Step 2:Confirming NVR’s power is enough, we suggest customer to use standard power.
Step 3:Confirming NVR HDD power interface and SATA interface is normal
4. User can’t check cloud ID
Step 1:NVR only can gain cloud ID after the NVR device is activated when connecting internet, it can check cloud ID through moving mouse to the margin top of main interface
Step 2:Enter NVR’s main interface, click right key,enter’system setting-system-basic information’, check product serial number if it is legal,the illegal serial number begin with “FFFFFFFF********“
5. Video management page can’t search IPC
Step1:Check NVR if it is connected to cable, we can check Ethernet port flicker to judge
Step2:If user can’t search ONVIF IPC, please confirm ONVIF IPC AND NVR is in the same network segment, confirm IPC to support ONVIF 2.1 and above version
6. Prompt channel run out of resources
Step1:The IPC total bandwidth to NVR is limited, when channel run out of resources, please reduce relative channel code rate
7. When multi channel NVR connect IPC, Video happen blocked, no smooth,off line
Step 1:We suggest user to use gigabit switch when IPC channel to connect NVR is more than 16CH
How to set recording system