•The number of cameras that can be connected may vary with DVR model.
•Actions that can be triggered may vary with alarm type.
5.(Optional) Click right to Arming Schedule and then set the time when actions will be triggered.
•The default schedule is 24×7. You may change it as needed and set up to eight different periods for each day. Time periods cannot overlap.
•To apply the same arming schedule to other days, select the intended days right to Copy To.
6.Click Apply to save the settings.
1.Click Alarm > Tampering.
2.Select the desired camera and then select Enable to enable
tampering detection
Camera
Enable
Trigger Actions 0
Arming Schedule y
Sensitivity
– n
(Note: By default, tampering detection is effective to the full screen.)